LEAP Bridge Enterprise V8i (SELECTseries 6) v13.00.00.68 ReadMe

Before you begin, please note the following:

• Review the End-User License Agreement (or EULA) carefully during the installation of LEAP Bridge. By installing this release, you agree to the terms and conditions of the agreement. A copy of the End User License Agreement named EULA.pdf will be included in the "\LEAP Bridge Enterprise\eula.pdf" folder of the product installation. By default, this location is "C:\Program Files\Bentley\LEAP Bridge Enterprise."
• Before installing LEAP Bridge, be sure to fully read this document as well as the Installer Note  where you can find critical information important to your installation.

This document contains the following information:

• What is New & Changed?
• Installer Note
• Directory Structure
• Support and Services Information
• Using the Online Help

What is New & Changed?

CONTENTS 

• LEAP Bridge Enterprise v13.00.00.68
• LEAP CONSPAN v13.00.00.68
• LEAP CONBOX v13.00.00.68
• LEAP RC-PIER v13.00.00.68
• LEAP GEOMATH v13.00.00.68
• Upgrade Instructions

LEAP Bridge Enterprise V8i (SELECTseries 6) v13.00.00.68 incorporates the following enhancements and fixes to itself and its component programs:

LEAP Bridge v13.00.00.68

Enhancements:

• Several enhancements to the ABC Wizard including new options for
  • Combined footing definition
  • Advanced definition of girders, different beam types in spans
  • Advanced definition of girders, different start and end distances in a span
  • Advanced definition of piles and customization of x and z for layout and batter direction specification, for both abutments and intermediate piers.
  • Program now allows user to specify unit prices for materials and computes and reports estimated quantities and cost for bridge.
  • On 3D model export to DGN, EC properties (dimensions, IDs, material properties) are written out as well.
  • Introduced a new bridge type cast-in-site post tensioned I-girder bridge for the India code option.
  • New workflow introduced so that after changes are made in GEOMATH and the model is updated to LEAP Bridge, users can still go into CONSPAN and RCPIER and make geometry changes.

Fixes:

• Span beam seat elevation report now displays the elevation at the top of the seat rather than bottom at cap level.
• Several 3D graphics issues have been fixed including incorrect section variation orientation for skewed flat slab and box girder bridges.
• Fixed issues with integral pier elevation computation when superstructure has a cross-slope defined.
• Fixed issue with bridge deck start and end when viewed in Geomath for offset bridges on curved alignments.
• Fixed issue with editing of bridge element names directly in tree view on the Geometry tab.
• Schematic curbs are drawn in bridge section views, even when curb is less than 1.5 ft.
• Corrected H-pile orientation in 3D and 2D view drawings.

LEAP CONSPAN v13.00.00.68

Enhancements:

• CONSPAN now offers a new option to consider sacrificial deck thickness in computation of LRFD live load distribution factors.
• CONSPAN offers an option to allow users to not include the reduction of live load distribution factors for moment in longitudinal beams on skewed supports.
• Load rating summary table now reports prestressing strand tension (PSStT) if selected for rating analysis. The computation of PSStT has been modified to follow the procedures of the MBE, section A3.13.4.2.b.
• For Canada code option, comprehensive load evaluation of prestressed girders per Chapter 14 of CSA S6-06 is now offered.
• New unified Help file replaces the previous user manual Volume 1.

Fixes:

• Rotations due to live loads were incorrect and have been fixed.
• Fixed the following Vertical Shear issue: When the option to use Simplified Shear procedure (LRFD article 5.8.3.4.3) was used, the design shear Vu was incorrectly using the shear corresponding to the maximum moment rather than the maximum shear.
• Live load distribution factor for multi-stemmed beams: When using Lever Rule the distribution factors were computed incorrectly by considering the distance from the edge of curb to the center of exterior web rather than to the center of the beam. This issue is now fixed.

• Shear Rating factors computed with the FLDOT option for counting shear stirrups across failure plane turned on, and simultaneously the simplified shear design procedure was used were incorrect. This issue is now fixed.
• The connection from CONSPAN to AASHTOware Virtis/Opis v6.3 was rewritten to make it more stable and easier to update in to newer versions in future releases.
• A new warning message highlighting current program assumptions on flared (or non parallel beam arrangement) is now displayed when the run analysis button is pressed.
• For Canada code option, minor bug fixes include
  • Deflection computation has been updated to use distribution factor for Moment, and considers the dynamic allowance for Truck.
  • Horizontal shear required vs. provided graph was using incorrect unit conversion, and was corrected.
  • Dead Load reactions were not multiplied by ULS value under ULS printout. Fixed now.

LEAP CONBOX v13.00.00.68

Enhancements:

• Post-tensioned I-girder bridge for CONBOX India:
  • Simply-supported parallel girders on straight alignments
  • Multi-stage post-tensioning
  • Parametric cross-section definition for I-girders
  • Library of cross-sections to choose from
  • End block and taper section definition
  • Elastic shortening, Concrete creep and shrinkage, and steel relaxation losses in post-tensioning tendons per IRC
  • Deflection calculation, stress checks, and shear and moment capacity calculations per IRC

Fixes:

• For CONBOX US: Corrected values of a, c, b, bw reported in the detailed moment capacity report for the California option.
• For CONBOX India: Resolved discrepancy in the permissible shear stress values shown in Design Parameters and the ones actually used in design.

LEAP RC-PIER v13. 00.00.68

Geometry Module: GEOMATH v13. 00.00.68

Fixes:

• Minor fixes to accommodate changes in LEAP Bridge

Upgrading from LEAP Bridge Enterprise

• Follow the on-screen instructions and install the program.
• The program will automatically be installed in the existing LEAP Bridge Enterprise folder.
• During installation, program default libraries will be added under “C:\ProgramData\Bentley\LEAP Bridge Enterprise\” folder to comply with Windows standards to eliminate problems with access to users without Admin privileges.
• The installation program will not overwrite the files already existing in the library folder.
• If you have customized program libraries, you can move them to the above folder, and set the correct paths in the Library Setup dialog from within LEAP Bridge interface.

Installer Note

How to install & activate LEAP Bridge V8i (SELECTseries 6)?

Contents:

  Installation Wizard

  Activation wizard

This section guides you through the process of installing LEAP Bridge on your computer. In order to install LEAP Bridge V8i, please login as an Administrative user. LEAP Bridge can be installed by invoking Setup.exe. If you use Setup.exe, no other special consideration is necessary. Simply follow the instructions that follow. For details on the installation, please refer to the Installation Wizard section in this manual. Note: LEAP Bridge V8i requires Microsoft .NET 3.5 framework to be installed in order to operate properly.

Installation Wizard:

• First log into the Bentley SELECT Services Web site (http://selectservices.bentley.com) and download the LEAP Bridge installation kit for the version you have purchased. Please do not download the individual components (such as CONSPAN, RC-PIER, etc.) if you intend to install LEAP Bridge. The LEAP Bridge Enterprise installation package includes the necessary components.
• Once you have downloaded the LEAP Bridge Enterprise installation files, locate the install folder. Run the installer file by double clicking the setup.exe icon.
• You will be greeted by the Welcome screen. Click Next> to proceed with the installation process.
• You are now presented with the End User License Agreement for this software. Please read the agreement and then click the radio button to accept the terms when finished. You may also print a copy for your records. Click Next> to continue.
• You will be asked for an installation location. This is the directory location of the program on your computer.
• The installer now has gather all the information needed to complete the installation. Click Install to finish the process. The wizard begins installing the program onto your computer. Once the process is complete, click Finish to exit the Wizard..
• After the installer completes its process, the program is ready for use. You can launch the program by clicking the Start button and then All Programs > Bentley > LEAP Bridge Enterprise.

Note: Until you have activated a license for the program, it will remain in demo mode and function for only 15 days past installation.

Activating a product using the Product Activation Wizard

This is for installations which use a Bentley Server to authenticate the Bentley SELECT License used to run LEAP Bridge. In order to complete the installation, the SELECT Server Name and Site Activation Key will be required. If you do not have these, please contact Bentley technical support. Without this information the installation will operate using a trial license for only 15 days.

• Install LEAP Bridge Enterprise following the instructions in the Installation section.
• Locate the Bentley SELECT License Management Tool, LicenseTool.exe in the program installation folder (typically the location is c:\Program Files\Bentley\LEAP Bridge Enterprise\).
• Select the SELECT subscriber activating against a hosted (Bentley) SELECT Server option and then click the Next > button.
• The dialog box displays with the Server name provided for Bentley’s server. Complete the Site Activation Key received from Bentley and click the Next > button. Before accepting the entered information, you may also choose to click the Test Connection button to confirm that the entries are correct.
• Enter the SELECT Server name and the Site Activation Key received from Bentley, and click the OK button. If you do not know these, please contact your system administration. Before accepting the entered information you may also choose to click the Test Connection button to confirm that the entries are correct.
• After the information is accepted by the system, the program then displays all the available licenses for your usage as shown in the following dialog box. The license security is now in place. The installation is complete and LEAP Bridge is ready for use.

Note: You may need to contact your system administrator if your organization uses a proxy server to connect to the Internet. Click the Proxy... button in the Product Activation Wizard to display a dialog for entering these connection settings.

Directory Structure

The default directory of LEAP Bridge is "C:\Program Files\Bentley\LEAP Bridge Enterprise\", if the user has not changed the location during installation. The tutorials are installed in the Example directory within LEAP Bridge folder. Help directory within LEAP bridge folder contains all the necessary help files for individual components. Lib folder contains the default library files for rebars, tendons, cross sections. It is recommended not to delete the default library files. Starting with v12.01.00.57, there is a change in the location of the library files. During installation, program libraries will by default be added under “C:\ProgramData\Bentley\LEAP Bridge Enterprise\” folder to comply with Windows standards to eliminate problems with access to users without Admin privileges. If you have customized program libraries, you can move them to the above folder, and set the correct paths in the Library Setup dialog from within LEAP Bridge interface.

Support and Services Information

FAQs, What's New/Changed and other technical information can be found on Bentley's technical support documentation page as well as the Bentley Library.

You can efficiently log issues that you encounter in Bentley products with the Service Ticket Manager. Information on other professional support and service offerings from Bentley is available online at SELECTservices Online.

Using the Online Help

LEAP Bridge features a user manual available in .chm format. A pdf version of the step by step guide to the tutorials is also provided. Tutorial files are located in Example directory. Adobe® Acrobat Reader® is required to use the pdf tutorial manual. Acrobat Reader is a free download available at www.adobe.com. The installation process will automatically install the user manual for LEAP Bridge and each component application (GEOMATH®, CONBOX®, CONSPAN® and RC-PIER®) in the Help folder. To access the manual and tutorials, select the appropriate link from the Help menu.